M42-FX

Manual lens adapter ring II Copper M42-FX

This adapter allows you to use M42 42mm mount lenses to fit on FX less Digital Camera.
Smooth surface for effortless mount,Infinity focus allowed.
Quality: Copper; Brand Name: K&F Concept
Compatible Cameras (Including, but not limited to):Fuji X-Pro1, X-E1, X-M1, X-A1, X-E2, X-T1
Smooth surface for effortless mount, fine made to be light weight and strong. Or effortless mount, fine made to be light weight and strong.

Where to buy

For product extended warranty services please click HERE

Attention:

'No Lens Attached' - Warning Message Appears:

If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.
Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.