L/M-E

Manual lens adapter ring L/M-NEX

Smooth surface for effortless mount,infinity focus allowed.
The adapters are precision made to insure the perfect fit.
Made of brass and aluminum (not plastic), anodized aluminum construction.
Compatible Cameras (Including, but not limited to): Sony NEX-3 NEX-3C NEX-3N NEX-5 NEX-5C NEX-5N NEX-5R NEX5T NEX6 NEX7 NEX-F3 a6000 a5000 a3500 a3000 Alpha A7 A7R NEX-VG10 VG20 etc NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II.
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Where to buy

For product extended warranty services please click HERE

Attention:

'No Lens Attached' - Warning Message Appears:

If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.
Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

L mount cameras are full-frame mirrorless cameras.
Adapting APS-frame lens to full-frame camera may generate vignetting, which is not the problem of the adapter. Some cameras could correct it by adjusting to APSC.