FD-EF

Manual lens adapter ring FD-EOS

Mounts Canon FD & FL 35mm SLR lenses to Canon EOS (EF, EF-S) Mount SLR Cameras; infinity focus or beyond guaranteed
Built-in multi-coated focusing correction lens.Supports manual control, manual focus, manual exposure.
Please note: It is not same between Canon FD mount and EF mount, this fd to ef adapter ring is only for Canon FD mount lens, please contact us if you want to purchase for Canon EF mount lens.
Compatible Cameras (including, but not limited to): EOS 10D, 20D, 20Da, 30D, 40D, 50D, 60D, 60Da, 70D, 80D, 90D, EOS 5D/II/III/IV, 5DS/R, 6D/II, 7D/II, 1D/II/IIN/III/IV, 1Ds/II/III, 1D C, 1D X/II, EOS Rebel, XT, XS, T1i-T7i, SL1, SL2, SL3, Blackmagic Pocket Cinema Camera 6K (Canon EF), Z CAM E2-S6 Super 35 6K, E2-F6 Full-Frame 6K,E2-F8 Full-Frame 8K Cinema Cameras.
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Where to buy

For product extended warranty services please click HERE

This adapter gives you the ability to use your irreplaceable prime lens and saves you the cost of purchasing new lenses
The adapters are precision made to insure the perfect fit.
Allows focus infinity.
Diaphragm control of the lens is set manually.
High quality and compact.
Made of brass and aluminum (not plastic).
Color: Black 100% Brand New

Canon EOS (EF, EF-S) Mount SLR Cameras - Popular models include:

• EOS 10D, 20D, 20Da, 30D, 40D, 50D, 60D, 60Da, 70D, 80D, 90D

• EOS 5D/II/III/IV, 5DS/R, 6D/II, 7D/II

• EOS 1D/II/IIN/III/IV, 1Ds/II/III, 1D C, 1D X/II

• EOS Rebel, XT, XS, T1i-T7i, SL1, SL2, SL3

• Blackmagic Pocket Cinema Camera 6K (Canon EF)

• Z CAM E2-S6 Super 35 6K, E2-F6 Full-Frame 6K,E2-F8 Full-Frame 8K Cinema Cameras

If your camera indicated "lens is not properly installed", please modify the camera menu settings.Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.
Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate while using this adapter.There is no electrical contacts in the adapter ring. Full manual operation,manual focus, manual iris adjustment can be achieved with body manual exposure,aperture priority exposure.In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body.You can shoot in Manual or Aperture Priority Mode. Before use, set your camera Menu: "Shoot without lens".